Terastation goes into standby or sleep mode

One of the possible reason to happen the TeraStation automatically shuts down, the “Auto Power Mode” or “Sleep Timer” function is in operation.
•Check the settings of Auto Power Mode.
The power switch or the Auto Power Mode is set to “AUTO” mode, the product will be turned OFF with all the PC installed NAS Navigator2 is not activated on the network.

1.Set the Auto Power Mode switch to “MANUAL”.
or
2.Boot the PC installed NAS Navigator2.

•Check the settings of Sleep Timer function.
If the Sleep Timer is set while the Auto Power Mode is under the “Manual” mode, the power of the TeraStation is turned OFF at the designated time.
* (The Sleep Timer function cannot be used when Auto Power Mode is set to “AUTO”.)

1.Check / change the settings and timing of the Sleep Timer function.
2.Click [System]-[Power Management]-[Sleep Timer] on the settings screen of the product.
3.Click [Modify Settings] of the Sleep Timer function.
4.Specify [Timer Interval], [Wake up at] and [Begin Sleep at], and click [Save].
*The procedure varies depending on your product type. Refer to the product manual for operation.

Mark as helpful. 7

Posted in: Network